Printing in Asia (Hong Kong Campus)

Follow the steps below to connect to printers at the Hong Kong campus.

Before starting, make sure you are connected to the uchicago-secure Wi-Fi network.

Printing in Asia (Hong Kong Campus)

Overview

Follow the steps below to connect to printers at the Hong Kong campus.

Before starting, make sure you are connected to the uchicago-secure Wi-Fi network.

---

Available Printers

• HK_RESOURCE_CENTER → 10.190.73.15
• HK_RESOURCE_CENTER2 → 10.190.73.14

---

Windows Setup

1. Connect to the uchicago-secure Wi-Fi network.
2. Press Windows Key + R to open the Run dialog.

3. Enter the following and click OK:

   \\busckprt01.ad.uchicago.edu

4. When prompted, enter your credentials:
   • Username: adlocal\CNetID
   • Password: your CNet password
5. Double-click one of the following printers:
   • HK_RESOURCE_CENTER
   • HK_RESOURCE_CENTER2
6. The printer will install automatically and be available in your applications.

---

Mac Setup (Manual Configuration)

Method A – Using IP (LPD)

1. Open System Settings (or System Preferences).
2. Go to Printers & Scanners.
3. Click the + (Add Printer) button.
4. Select the IP tab.
5. Configure the following:
   • Protocol: Line Printer Daemon – LPD
   • Address:
     • 10.190.73.15 → HK_RESOURCE_CENTER
     • 10.190.73.14 → HK_RESOURCE_CENTER2
   • Queue: (leave blank)
6. Set the Name:
   • HK_RESOURCE_CENTER (for Printer 1)
   • HK_RESOURCE_CENTER2 (for Printer 2)
7. Leave Location blank.
8. Under Use, select Choose Software and pick a generic PostScript printer driver.
9. Click Add, then click OK to complete setup.

---

Alternative (Mac)

If you prefer a guided setup, you can download the Mac installation guide:

• Mac Installation Guide (PDF)

---

Troubleshooting

• Make sure you are connected to uchicago-secure (not guest Wi-Fi)
• Double-check your credentials include adlocal\ if prompted
• If the printer does not appear, try re-adding it or restarting your computer